Whole Blood HIV 1/2 And Syphilis TP Rapid Test Kit HIV 1/2 Rapid Test Kit

Human Immunodeficiency Virus HIV 1/2 and Syphilis Treponema Pallidum Tp Duo Rapid Test Whole Blood

INTENDED USE

MAIN CONTENTS

Rapid Test Cassette in Pouch

Buffer

Disposable dropper

Package insert

PRECAUTIONS

• For professional in vitro diagnostic use only. Do not use after expiration date.
• Do not eat, drink or smoke in the area where the specimens or kits are handled.
• Handle all specimens as if they contain infectious agents. Observe established precautions against microbiological hazards throughout testing and follow the standard procedures for proper disposal of specimens.
• Wear protective clothing such as laboratory coats, disposable gloves and eye protection when specimens are being tested.
• Humidity and temperature can adversely affect results.
• The used test should be discarded according to local regulations.

SRORAGE

Store as packaged in the sealed pouch at room temperature or refrigerated (2-30°C).

The test is stable through the expiration date printed on the sealed pouch.

The test must remain in the sealed pouch until use.

DO NOT FREEZE.

Do not use beyond the expiration date.

OPERATION
Bring tests, specimens, and/or controls to room temperature (15-30°C) before use.
1.Remove the test from its sealed pouch, and place it on a clean, level surface. Label the test with patient or control identification. For best results, the assay should be performed within one hour.
2.Using the provided disposable dropper, transfer 2 drops of serum/plasma to specimen well (S) of the cassette, then start the timer.
OR
Transfer 1 drop of whole blood specimen to specimen well (S) of the cassette with the provided disposable dropper, then add 1 drop of buffer and start the timer.
OR
Allow 2 hanging drops of fingerstick whole blood specimen to fall into the center of specimen well (S) on the cassette, then add 1 drop of buffer and start the timer.
Avoid trapping air bubbles in the specimen well (S), and do not add any solution to the result area.
As the test begins to work, color will migrate across the membrane.
3. Wait for the colored band(s) to appear. The result should be read at 10 minutes. Do not interpret the result after 20 minutes.