Send Message
products

Antigen Strep A Diagnostic Rapid Test Cassette Device Strip By Swab Group A Streptococci

Basic Information
Place of Origin: China
Brand Name: Dewei
Certification: ISO
Model Number: STREPA
Minimum Order Quantity: 10000pcs
Price: $0.5-1.0/Test
Packaging Details: 25tests/box 20test/box
Delivery Time: 5-20 days
Payment Terms: T/T, Western Union, MoneyGram
Supply Ability: 100000pcs/day
Detail Information
Test Prarameter: Strep A Package: 25pcs/box, 20pcs/box
Storage: Room Temperature 4-30℃ Sample: Swab
Principle: Immunochromatography Result Time: 15mins After Operation
Component: Rapid Test Cassette + Buffer Origin: China
High Light:

Antigen Diagnostic Rapid Test Cassette

,

Swab Diagnostic Rapid Test Cassette

,

Strep A Rapid Antigen Cassette


Product Description

Strep A Rapid Diagnostic Test Device Strip Cassette by Swab Group A Streptococci

INTENDED USE

The Strep A Rapid Test (Swab) is a rapid visual immunoassay for the qualitative, presumptive detection of Group A Streptococcus antigens in human throat swab specimens. This kit is intended for use as an aid in the diagnosis of Strep A infection.

 

INTRODUCTION

Beta-hemolytic Group A Streptococcus is a major cause of upper respiratory infections such as tonsillitis, pharyngitis, and scarlet fever. Early diagnosis and treatment of Group A Streptococcal pharyngitis has been shown to reduce the severity of symptoms and further complications, such as rheumatic fever and glomerulonephritis.

Conventional methods for detecting Strep A infection are dependent on isolation and subsequent identification of the organism, and often require 2448 hours. Recent development of immunological techniques to detect Group A Streptococcal antigen directly from throat swabs allow physicians to diagnose and administer therapy immediately.

 

PRINCIPLE

The Strep A Rapid Test (Swab) detects Group A Streptococcus antigens through visual interpretation of color development on the internal strip. Anti-Strep A antibodies are immobilized on the test region of the membrane. During the test, the specimen reacts with polyclonal anti-Strep A antibodies conjugated to colored particles and precoated onto the sample pad of the test. The mixture then migrates through the membrane by capillary action and interacts with reagents on the membrane. If there is sufficient Strep A antigen in the specimen, a colored band will form at the test region of the membrane. The presence of this colored band indicates a positive result, while its absence indicates a negative result. The appearance of a colored band at the control region serves as a procedural control, indicating that proper volume of specimen has been added and membrane wicking has occurred.

 

STORAGE AND STABILITY

• Store at 39~ 86 º F (4 ~ 30 º C) in the sealed pouch for 18 months.

 

PRECAUTIONS

For professional in vitro diagnostic use only.

Do not use after the expiration date indicated on the package. Do not use the test if the foil pouch is damaged. Do not reuse tests.

This kit contains products of animal origin. Certified knowledge of the origin and/or sanitary state of the animals does not completely guarantee the absence of transmissible pathogenic agents. It is therefore recommended that these products be treated as potentially infectious, and handled by observing usual safety precautions (e.g., do not ingest or inhale).

Avoid cross-contamination of specimens by using a new extraction tube for each specimen obtained.

Read the entire procedure carefully prior to testing.

Do not eat, drink or smoke in any area where specimens and kits are handled. Handle all specimens as if they contain infectious agents. Observe established precautions against microbiological hazards throughout the procedure and follow standard procedures for the proper disposal of specimens. Wear protective clothing such as laboratory coats, disposable gloves and eye protection when specimens are assayed.

Do not interchange or mix reagents from different lots. Do not mix solution bottle caps.

Use only dacron or rayon tipped sterile swabs with plastic shafts such as those provided. Do not use calcium alginate, cotton tipped, or wooden shafted swabs.

Reagents 1 & 2 are slightly caustic. Avoid contact with eyes or mucous membranes. In the event of accidental contact, wash thoroughly with water.

The positive and negative controls contain sodium azide, which may react with lead or copper plumbing to form potentially explosive metal azides. When disposing of these solutions always flush with copious amounts of water to prevent azide buildup.

Humidity and temperature can adversely affect results.

Used testing materials should be discarded according to local regulations.

SPECIMEN COLLECTION AND STORAGE

Collect throat swab specimens by standard clinical methods. Swab the posterior pharynx, tonsil and other inflamed areas. Avoid touching the tongue, cheeks or teeth with the swab.

It is recommended that swab specimens be processed as soon as possible after collection. If swabs are not processed immediately, they should be placed in a sterile, dry, tightly capped tube or bottle and refrigerated. Do not freeze. Swabs can be stored at room temperature (15-30°C) up to 4 hours, or refrigerated (28°C) up to 24 hours. All specimens should be allowed to reach room temperature (15-30°C) before testing.

If a liquid transport method is desired, use Modified Stuart’s Transport Media and follow the manufacturer’s instructions. Do not place the swab in any transport device containing medium. Transport medium interferes with the assay, and viability of the organisms is not required for the assay. Do not use transport media formulas that include charcoal or agar.

If a bacteria culture is desired, lightly roll the swab on a 5% sheep blood agar plate before using it in the test. The extraction reagents in the test will kill bacteria on the swabs and make them impossible to culture.

 

TEST PROCEDURE

1. Bring tests, specimens, reagents and/or controls to room temperature (1530°C) before use.

Prepare swab specimens:

• Place a clean extraction tube in the designated area of the workstation. Add 4 drops of reagent 1 to the extraction tube, then add 4 drops of reagent 2. Mix the solution by gently swirling the extraction tube.

• Immediately immerse the swab into the extraction tube. Use a circular motion to roll the swab against the side of the extraction tube so that the liquid is expressed from the swab and can reabsorb.

• Let stand for 1-15 minutes at room temperature, then squeeze the swab firmly against the tube to expel as much liquid as possible from the swab. Cap the extraction tube with the attached dropper tip. Discard the swab following guidelines for handling infectious agents.

2. Remove the test from its sealed pouch, and place it on a clean, level surface. Label the device with patient or control identification. For best results, the assay should be performed within one hour.

3. Add 2 drops (approximately 100 µL) of extracted solution from the extraction tube to the sample well on the test device.

Avoid trapping air bubbles in the specimen well (S), and do not add any solution to the observation window.

As the test begins to work, color will migrate across the membrane.

4. Wait for the colored band(s) to appear. The result should be read at 5 minutes. Do not interpret the result after 10 minutes.

 

INTERPRETATION

POSITIVE: Two colored bands appear on the membrane. One band appears in the control region (C) and another band appears in the test region (T).

NEGATIVE: Only one colored band appears, in the control region (C). No apparent colored band appears in the test region (T).

INVALID: Control band fails to appear. Results from any test which has not produced a control band at the specified read time must be discarded. Please review the procedure and repeat with a new test. If the problem persists, discontinue using the kit immediately and contact your local distributor.

 

QUALITY CONTROL 

  • Internal procedural controls are included in the test. A colored band appearing in the control region (C) is considered an internal positive procedural control. It confirms sufficient specimen volume and correct procedural technique.
  • Good laboratory practice recommends the use of control materials to ensure proper kit performance. A positive control containing heat-killed Group A Streptococcus and a negative control containing heat-killed non-Group A Streptococcus are provided with each kit.

Operating Procedure for External Quality Control Testing

  • Add 4 drops of reagent 1 and 4 drops of reagent 2 to an extraction tube.
  • Thoroughly mix the control by shaking the bottle vigorously. Add 1 drop of positive or negative control to the tube.
  • Place a clean sterile swab into the tube and swirl. Leave the swab in the extraction tube for 1 minute. Then express the liquid from the swab head by rolling the swab against the inside of the extraction tube and squeezing the extraction tube as the swab is with drawn. Discard the swab.
  • Continue as described from Step 2 of the Procedure section, above.
  • If controls do not yield expected results, do not use the test. Repeat the test or contact your distributor.

LIMITATION

The Strep A Rapid Test (Swab) is for professional in vitro diagnostic use, and should only be used for the qualitative detection of Group A Streptococcus. No meaning should be inferred from the color intensity or width of any apparent bands.

The accuracy of the test depends on the quality of the swab specimen. False negatives may result from improper specimen collection or storage. A negative result may also be obtained from patients at the onset of the disease due to low antigen concentration.

The test does not differentiate asymptomatic carriers of Group A Streptococcus from those with symptomatic infection. If clinical signs and symptoms are not consistent with laboratory test results, a follow-up throat culture is recommended.

In rare cases, test specimens heavily colonized with Staphylococcus aureus can yield false positive results. If clinical signs and symptoms are not consistent with clinical test results, a follow-up culture and grouping procedure should be performed.

Respiratory infections, including pharyngitis, can be caused by streptococci from serogroups other than Group A, as well as other pathogens.

As with all diagnostic tests, a definitive clinical diagnosis should not be based on the results of a single test, but should only be made by the physician after all clinical and laboratory findings have been evaluated.

 

 

Contact Details
Sherry

Phone Number : +8613316305166

WhatsApp : +8615267039708