|Shelf Life:||2 Years||Sensitivity:||99.09%|
Lateral Flow Antigen Test Cassette,
HAV Antigen Test Cassette,
HAV Rapid Diagnostic Test Kit
HAV IgG/IgM Rapid Test is a lateral flow chromatographic immunoassay for the qualitative detection and differentiation of antibodies (IgG and IgM) to Hepatitis A virus (HAV) in human serum, plasma or whole blood.
Hepatitis A Virus (HAV) IgG/IgM Rapid Test is a rapid chromatographic immunoassay for the qualitative detection of IgG and IgM antibodies to HAV in human whole blood, serum or plasma.
• Rapid Test.
• Disposable dropper.
• Instruction for use.
Bring tests, specimens, buffer and/or controls to room temperature (15- 30°C) before use.
1. Remove the test cassette from the foil pouch and use it as soon as possible. Best results will be obtained if the assay is performed within one hour.
2. Place the test on a clean and level surface. Transfer the specimen by a pipette or a disposable dropper:
• To use a Pipette: Transfer 5 ul of whole blood, serum or plasma to Well-S (S) of the test cassette, then add 3~4 full drops of buffer to Well-B (B), and start the timer. (See illustration ① below). Avoid trapping air bubbles in S.
• To use a Disposable Specimen Dropper: Hold the pipette vertically; draw the specimen up to the Fill Line as shown in illustration ① below. Transfer the specimen to S of the test cassette, then add 3~4 full drops of buffer to B and start the timer.Avoid trapping air bubbles in S.
3. Wait for the colored line(s) to appear. The result should be read at 15 minutes. Do not interpret the result after 20 minutes.
【INTERPRETATION OF RESULTS】
Negative (-) : Only one color line appears on the control region (C). Positive (+) : IgG Positive: Both IgG test region (IgG) and control region appear color line.
IgM Positive: Both IgM test region (IgM) and control region appear color line.
IgG/IgM Positive: Both test region (IgG and IgMM) and control region appear color line.
Invalid: No visible line at all, or there is a visible line only in the test region and not in the control region. Repeat with a new test kit.