CE Canine (CPV) Parvovirus Antigen Feces Dog Rapid Test Kit High Accuracy
【INTENDED USE】
The Canine Parvovirus (CPV) Antigen Rapid Test Kit is a chromatographic immunoassay for the qualitative detection of Canine Parvovirus antigen in canine stool(feces).
【OPERATION】
Bring tests, specimens, buffer and/or controls to room temperature (15- 30°C) before use.
1. Use swab to collect canine stool (feces), then insert the swab into the assay buffer tube.
2. Mix the swab until the specimen has been dissolved totally into the assay buffer (Appx. 10s), then squeeze the solution from the cotton swab as much as possible.
3. Discard the cotton swab and cover the tube with cap, then wait for 2 minutes.
4. Remove the test from its sealed pouch, and place it on a clean, level surface. Label the cassette device with patient or control identification.
5. Add 3 drops of assay buffer into the sample well on device, drop by drop vertically, and start the timer.
6. Wait for the colored band(s) to appear. The result should be read at 10 minutes. Do not interpret the result after 15 minutes.
【SAMPLE COLLECTION】
• Specimen of this test is canine stool(feces).
• The specimensshould be tested immediately after collection.
• If specimens are not tested immediately, they should be stored at 2~8°C for 24hours. For longer storage, freeze at -20°C or below.
• Canine stool (feces) should be collected as shown in the picture on the below.
Excessive fecal amount may induce a false positive result.
【INTERPRETATION OF RESULTS】
Preliminary positive (+) Only one colored band appears, in the control region (C). No colored band appears in the test region (T).
Negative (-) Two colored bands appear on the membrane. One band appears in the control region (C) and another band appears in the test region (T).
Invalid Control band fails to appear. Results from any test which has not produced a control band at the specified read time must be discarded.
Please review the procedure and repeat with a new test. If the problem persists, discontinue using the kit immediately and contact your local distributor.
【CONTENTS】
• Rapid Test
• Buffer in Tube
• Swab
• Instruction for use
【STORAGE AND STABILITY】
The kit should be stored at 2-30°C until the expiry date printed on the sealed pouch
The test must remain in the sealed pouch until use
Keep away from direct sunlight, moisture and heat
Do not freeze.
Care should be taken to protect the components of the kit from contamination.
Do not use if there is evidence of microbial contamination or precipitation.
Biological contamination of dispensing equipment, containers or reagents can lead to false results.
【Manufactured by】
DEWEI MEDICAL EQUIPMENT CO.,LTD
5th floor, No. 4 building, Shiyou Industrial Park, Jun'an , Shunde, Foshan, China 52832
Your message must be between 20-3,000 characters!